Как выбрать садовую тачку

A Garden Two-Wheeled Or One-Wheeled Car, Which Is Better

Вот любопытная конструкция - снял кузов и можно мешки перевозить. Но 4 колеса делают проезд удобным только по ровному основанию.Our choice is a two-way car. And for one reason, it's easier to control and not so tired. It's not a bad one, but it's possible to plug it if the center of gravity of the load is not separated by the center of the car and hands are already tired over the hours of work.

What kind of material is better.

Given that we're considering the self-producing cars, we need to pick the material. And do it properly because we do it once and for all. The choice is not as big as the best.

- wood

- Black metal

- non-refrigerating or zinc steel

The wooden car is less long, not so beautiful, but simple in the manufacture and light itself. There's no need for welding, a few boards, slices and a screwdriver or nails and hammers. Another advantage is the cheapest option.

За исполнение - двойка, но за фантазию твёрдое

A black metal car will require a weld machine and a man who can treat it. But it's much longer than the previous one. It is, indeed, heavier than it could have been if the wheels were to be fixed. We'll talk about this later.

Нет подставки - придётся постоянно наклоняться за ручкой тачки.Stainless steel is practically eternal. Someone's going to think of such a design as to be stupid and unwarranted, but she'll definitely survive you, children and grandchildren. The thin leaf stain will be harder than the usual black leaf, but the durability of equals will not be found.

Our choice is metal. Unrelenting or not, it depends on your income. But a wooden design, I think it doesn't make sense, because in a couple of years it's gonna have to be done again.

Main elements

The garden or construction cars are not material. The main elements will be present in one and two:

  1. Rama. A round tube or a square profile, you're probably gonna stop on these materials.Такая тачка даже с виду кажется неподъёмной. А если её загрузить щебнем или песком - руки от пары ходок вытянутся до колен. But we can do without the frame: the right to the body will be rotten under the wheel and hold.
  2. Body. The introductory version is usually presented by a stamped body with no weld. In our option, when the car goes with its hands, we'll have to make five sets. It'll be the bottom and four sides. You can try at least two sides of the line. But if you can do it, it's not up to us.
  3. The wheel. Trust me, these elements depend on a lot. The best option is camera wheels. And let you not be embarrassed that there's a risk of swinging the wheel or often pumping it. But on these wheels, your aggregate will literally be the one who's gonna fight the slobs.
  4. Hands. In the form of letters “P”, “T” or “H”, that should also be decided. Preliminary drawings will help determine. Personally, our choice falls on the P-shaped or N-like. The remaining option (T) is not very convenient if it is necessary to transport too heavy goods.